Table of Contents
Controlling a camera using an ATMega32
Author: Robert Harrison
Email: rharrison [email @ goes here ] hgf.com *NB The awkward email address format is to prevent my address being havested by the spammers
To Do
Everything
Picture of Optocoupler and camera
Introduction
This guide will explain how you can take control a cameras using an Atmel ATmega32 microprocessor.
The Plan
- Stuff here
Tools and Parts Required
- ATmega32 Development Board
- Soldering Iron & Solder (14-25 Watts with a fine point should be just fine, get some thin 0.5mm solder for an easy life)
- Side cutters (or nippers as they are sometimes called )
- Breadboard
- Lots of stuff
